Murata GRM Series MLCC: Complete Selection Guide (C0G, X5R, X7R, 0201-1210)
Murata is the world's largest MLCC manufacturer, and the GRM series is its broadest line of monolithic ceramic chip capacitors — billions of them ship into phones, cars, servers, and factory automation every month. If your BOM says "capacitor, 100 nF, X7R, 0603," there is a good chance the reference part is a Murata GRM.
Geefook stocks the full Murata GRM range across all common dielectrics and case sizes, alongside our full line of ceramic capacitors. This guide covers how to choose, decode, and cross-reference them.
Case Sizes and Murata Codes
| EIA Case | Metric (mm) | Murata Code | Typical Role |
|---|---|---|---|
| 0201 | 0603 (0.6 × 0.3) | GRM033 | Ultra-compact: phones, wearables, modules |
| 0402 | 1005 (1.0 × 0.5) | GRM155 | High-density consumer, IoT |
| 0603 | 1608 (1.6 × 0.8) | GRM188 | The workhorse size — most-used overall |
| 0805 | 2012 (2.0 × 1.25) | GRM21B | Higher capacitance / higher voltage |
| 1206 | 3216 (3.2 × 1.6) | GRM31C | Bulk decoupling, 100 µF class |
| 1210 | 3225 (3.2 × 2.5) | GRM32E | High-cap bulk, industrial rails |
Larger cases (1812, 1825, 2220) are available for high-voltage and high-capacitance applications.
Dielectric Types: The Decision That Matters Most
| Characteristic | C0G (NP0) | X7R | X5R | Y5V |
|---|---|---|---|---|
| Capacitance range | pF – ~0.1 µF | nF – 100+ µF | nF – 100+ µF | up to 100 µF |
| Temp. stability | ±30 ppm/°C | ±15 % (-55~125 °C) | ±15 % (-55~85 °C) | +22/-82 % |
| Typical use | Timing, filters, RF | General bulk / bypass | Bulk / bypass, cost-sensitive | Non-critical only |
Rule of thumb: C0G for precision and RF, X7R for everything else, X5R when the budget is tight and the temperature range allows, Y5V only where capacitance accuracy is irrelevant.
Decoding the Part Number
Using the world's most common MLCC, GRM188R71H104KA93D:
GRM — monolithic ceramic chip capacitor series
188 — case size 1.6 × 0.8 mm (0603 / 1608 metric)
R — thickness code (0.8 mm)
7 — temperature characteristic: X7R (6 = X5R, 5 = Y5V; C0G uses a different code block)
1H — rated voltage: 50 V (0J = 6.3 V, 1A = 10 V, 1C = 16 V, 1E = 25 V)
104 — capacitance in pF: 10 × 10⁴ pF = 100 nF
K — tolerance ±10 % (J = ±5 %, M = ±20 %)
A93 — Murata internal specification code
D — packaging
So GRM188R71H104KA93D = 0603, X7R, 50 V, 100 nF, ±10 % — the single highest-volume MLCC value in the industry.
The DC Bias Effect — Why Brand Matters
Here is what datasheets don't advertise loudly: a 0603 X7R 100 nF capacitor rated at 50 V can lose 40–70 % of its effective capacitance at 25 V DC bias. Physical size, dielectric, and process quality all drive this.
Murata publishes measured bias curves for every part in its free SimSurfing tool — one reason engineers specify Murata by name instead of accepting generic substitutes. Swap in a cheap MLCC on a 24 V rail and you may effectively be installing a 30 nF part.
Practical guidance:
For 24 V / 48 V rails, derate: move to 0805 or larger, or select a higher voltage rating
In tight designs, check the bias curve — not just the headline capacitance
Sibling Series Worth Knowing
GCM — automotive-qualified (AEC-Q200) counterpart of GRM; same case sizes, stricter reliability screening
Soft-termination variants — for boards subject to flexing, thermal shock, or solder-stress cracking (automotive, power tools, industrial)
High-voltage GRM — 100 V to 3 kV class for lighting, power conversion, and snubbers
Common Cross-References
| Murata | Samsung | TDK | Taiyo Yuden | Yageo |
|---|---|---|---|---|
| GRM033 (0201) | CL03 | C0201 | — | CC0201 |
| GRM155 (0402) | CL05 | C0402 | — | CC0402 |
| GRM188 (0603) | CL10 | C1608 | JMK107 | CC0603 |
| GRM21B (0805) | CL21 | C2012 | JMK212 | CC0805 |
| GRM31C (1206) | CL31 | C3216 | JMK316 | CC1206 |
| GRM32E (1210) | CL32 | C3225 | JMK325 | CC1210 |
FAQ
X7R or X5R for a new design?
If the device stays under 85 °C, X5R is fine and often cheaper per µF. Above that — or for long service life — go X7R.
Why does my 100 nF part measure only 50 nF?
Measurement AC level plus DC bias. MLCCs are specified at small-signal, 0 V bias; on a live rail the effective capacitance drops. Use Murata's SimSurfing tool to predict the real value.
GRM vs GCM?
Same electrical family; GCM adds AEC-Q200 qualification and automotive-grade lot control. Use GCM in anything that moves, vibrates, or must not fail.
In Stock at Geefook
Geefook carries the full Murata GRM line — high-runners like GRM188R71H104KA93D, compact GRM155R71H104KE14D, high-capacitance parts like GRM188R60J106KE47D (10 µF, X5R, 0603), and C0G RF values — with competitive pricing, same-day dispatch from Hong Kong, and batch traceability.
Send your BOM to sales@geefook.com for a same-day quote, or submit an inquiry online.
Characteristics and codes summarized from Murata public documentation. Verify against the latest datasheet for your exact part number.









